Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 1.65V to 5.5V.
   • Connect the power supply to the V_DD pin and ground to the GND pin.

2. Input Signals:

   • The input voltage (V_I) should be between 0V and V_DD.
   • Ensure that the input signals do not exceed the supply voltage to avoid damage.

3. Output Signals:

   • The output voltage (V_OH) when high should be at least 2.4V and can go up to V_DD - 0.1V.
   • The output voltage (V_OL) when low should be no more than 0.4V.
   • The output can sink up to 20mA and source up to -16mA.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 25ns under standard conditions (V_DD = 5V, t_r/t_f = 10ns/10ns).

5. Thermal Considerations:

   • The maximum power dissipation (P_D) is 660mW. Ensure proper heat dissipation if operating near this limit.
   • The operating temperature range (T_A) is from -40°C to 85°C. Avoid operating outside this range to prevent damage or reduced performance.

6. Storage and Handling:

   • Store the device in a dry, cool place.
   • Handle with care to avoid static discharge, which can damage the device.

7. Mounting:

   • Solder the device to the PCB using appropriate soldering techniques and temperatures to avoid thermal stress.
   • Ensure good mechanical and electrical connections to all pins.

8. Testing:

   • After mounting, test the device to ensure it meets the specified parameters.
   • Use a multimeter to check the supply voltage and output voltages.

By following these guidelines, you can ensure optimal performance and reliability of the SI7431DP-T1-GE3.