Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent damage from static electricity.

2. Mounting:

   • Ensure proper thermal management by using a heatsink if necessary.
   • Apply thermal paste between the device and the heatsink for better heat dissipation.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (Vgs) does not exceed the maximum rating of ±20V.
   • Use short and thick wires to minimize inductance and resistance.

4. Operating Conditions:

   • Do not exceed the maximum drain-source voltage (Vds) of 600V.
   • Ensure the continuous drain current (Id) does not exceed 20A at 25°C or 13.5A at 100°C.
   • Monitor the junction temperature (Tj) to ensure it stays within the range of -55°C to 175°C.

5. Storage:

   • Store the device in a dry and cool place.
   • Keep the device away from direct sunlight and sources of heat.

6. Testing:

   • Perform initial testing at low power levels to ensure proper operation.
   • Gradually increase the power levels while monitoring temperature and performance.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate protective equipment and follow all relevant safety standards.