Instructions:

1. Installation:

   • Ensure the power supply is disconnected before installation.
   • Mount the DSEI12-10A on a flat, stable surface using the provided mounting hardware.
   • Secure the power supply to prevent movement or vibration.

2. Wiring:

   • Connect the input wires (L and N) to the AC power source.
   • Connect the output wires (V+ and V-) to the load.
   • Ensure all connections are tight and secure to avoid loose connections.

3. Operation:

   • Turn on the AC power source.
   • Monitor the output voltage and current to ensure they meet the required specifications.
   • If the power supply overheats or malfunctions, turn off the power immediately and check for any issues.

4. Maintenance:

   • Regularly inspect the power supply for any signs of damage or wear.
   • Clean the exterior with a dry cloth to remove dust and debris.
   • Do not use water or cleaning agents that could damage the power supply.

5. Troubleshooting:

   • No Output Voltage:
     • Check the input voltage and connections.
     • Verify that the power supply is not overloaded.
   • Overheating:
     • Ensure proper ventilation around the power supply.
     • Check for any short circuits or excessive loads.
   • Output Voltage Fluctuations:
     • Check for stable input voltage.
     • Ensure the load is within the specified range.

6. Safety Precautions:

   • Do not open the power supply housing.
   • Keep the power supply away from flammable materials.
   • Use only the specified input voltage range to avoid damage.
   • Disconnect the power supply before performing any maintenance or repairs.