Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress on the leads and body.

2. Mounting:

   • Ensure proper orientation during soldering. The cathode (shorter lead) should be connected to the positive side of the circuit.
   • Preheat the PCB to reduce thermal shock.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Allow the diode to cool naturally after soldering.

3. Electrical Connections:

   • Connect the Zener diode in reverse bias across the load to regulate voltage.
   • Use a current-limiting resistor to protect the diode from exceeding its maximum Zener current (Izm).

4. Testing:

   • Test the diode using a multimeter set to the diode test mode to ensure it is functioning correctly.
   • Measure the forward voltage drop (Vf) and reverse breakdown voltage (Vz) to verify specifications.

5. Safety:

   • Do not exceed the maximum power dissipation (Pz) to avoid overheating and potential failure.
   • Ensure adequate heat sinking if operating at high currents or in high ambient temperatures.

6. Disposal:

   • Dispose of the diode according to local environmental regulations.