Share:
Specifications
SKU: 12376103
| Parameter | Symbol | Min | Typ | Max | Unit | Condition |
|---|---|---|---|---|---|---|
| Input Forward Voltage | VIF | - | 1.2 | 1.6 | V | IF = 20 mA, TA = 25°C |
| Input Current | IF | 5 | 20 | 30 | mA | VIF = 1.2 V, TA = 25°C |
| Output Collector-Emitter Saturation Voltage | VCE(sat) | - | 0.3 | 0.5 | V | IC = 150 mA, VCE = 5 V, TA = 25°C |
| Output Collector Current | IC | - | 150 | 200 | mA | VCE = 5 V, TA = 25°C |
| Propagation Delay Time | tpd | - | 1.5 | 3.0 | μs | VCC = 5 V, IF = 20 mA, IC = 150 mA, TA = 25°C |
| Rise Time | tr | - | 0.3 | 0.8 | μs | VCC = 5 V, IF = 20 mA, IC = 150 mA, TA = 25°C |
| Fall Time | tf | - | 0.3 | 0.8 | μs | VCC = 5 V, IF = 20 mA, IC = 150 mA, TA = 25°C |
| Isolation Voltage | VIORM | - | - | 1500 | Vrms | 1 min, 50/60 Hz |
| Operating Temperature Range | TOP | -40 | - | 105 | °C | - |
| Storage Temperature Range | TSTG | -40 | - | 125 | °C | - |
Instructions for Use:
Input Side:
- Apply the input signal to the LED side of the optocoupler.
- Ensure the input current (IF) is within the specified range to avoid damage to the LED.
Output Side:
- Connect the output transistor to the load circuit.
- Ensure the collector-emitter voltage (VCE) and collector current (IC) are within the specified limits to prevent damage to the transistor.
Power Supply:
- The device requires a power supply (VCC) to operate the output transistor.
- Ensure the power supply voltage is within the recommended range.
Isolation:
- The TLP250 provides electrical isolation between the input and output sides.
- Ensure that the isolation voltage (VIORM) is not exceeded to maintain safety and performance.
Temperature Considerations:
- Operate the device within the specified operating temperature range (TOP) to ensure reliable performance.
- Store the device within the specified storage temperature range (TSTG) to prevent damage.
Timing Parameters:
- Pay attention to the propagation delay time (tpd), rise time (tr), and fall time (tf) to ensure the device meets the timing requirements of your application.
Mounting and Handling:
- Handle the device with care to avoid mechanical stress.
- Follow proper soldering techniques to ensure good electrical connections and to prevent thermal damage.
By following these parameters and instructions, you can ensure optimal performance and reliability of the TLP250 (TP1.F) optocoupler in your application.
(For reference only)Inquiry - TLP250(TP1.F)
