Share:
Specifications
SKU: 12387986
| Parameter | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| VDD | Supply Voltage | 2.7 | - | 5.5 | V |
| IDD | Supply Current | - | 100 | - | μA |
| VIH | Input High Voltage | 2.0 | - | 5.5 | V |
| VIL | Input Low Voltage | 0.8 | - | 2.0 | V |
| VOH | Output High Voltage | 2.4 | - | VDD - 0.1 | V |
| VOL | Output Low Voltage | 0 | - | 0.4 | V |
| IO | Output Current | - | 10 | - | mA |
| fMAX | Maximum Clock Frequency | - | 100 | - | MHz |
| tpd | Propagation Delay Time | 5 | - | 15 | ns |
| tplh | Output Rise Time | 3 | - | 10 | ns |
| tpwh | Output Fall Time | 3 | - | 10 | ns |
| TA | Operating Temperature Range | -40 | - | 85 | °C |
Instructions for Using PBL3771:
Power Supply:
- Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
- The typical supply current (IDD) is 100 μA.
Input Levels:
- Input high voltage (VIH) should be between 2.0V and 5.5V.
- Input low voltage (VIL) should be between 0.8V and 2.0V.
Output Levels:
- Output high voltage (VOH) will be between 2.4V and VDD - 0.1V.
- Output low voltage (VOL) will be between 0V and 0.4V.
- The output current (IO) can typically sink or source up to 10 mA.
Frequency and Timing:
- The maximum clock frequency (fMAX) is 100 MHz.
- Propagation delay time (tpd) ranges from 5 ns to 15 ns.
- Output rise time (tplh) and fall time (tpwh) are both between 3 ns and 10 ns.
Temperature:
- The operating temperature range (TA) is from -40°C to 85°C.
Handling:
- Handle the device with care to avoid electrostatic discharge (ESD) damage.
- Use appropriate ESD protection measures when handling or soldering the device.
Mounting:
- Follow recommended PCB layout guidelines for optimal performance.
- Ensure proper thermal management if operating at higher temperatures or currents.
Testing:
- Test the device under specified conditions to ensure it meets the required performance parameters.
Storage:
- Store the device in a dry, cool place away from direct sunlight and moisture.
Inquiry - PBL3771
