Instructions for Using the L6387ED

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 30V.
   • The operating current (Icc) can vary between 12mA and 25mA depending on the load.

2. Output Configuration:

   • The maximum output current per channel is 2A. Ensure that the load does not exceed this limit to avoid damage.
   • The maximum power dissipation is 100W. Use appropriate heat sinks or cooling methods if operating at high power levels.

3. Temperature Considerations:

   • The device can operate within a temperature range of -40°C to 150°C.
   • Store the device in an environment with temperatures between -40°C and 150°C.

4. Input Signals:

   • The input voltage range (Vin) should be between 0V and 5V.
   • Ensure the input signals are within this range to prevent damage to the device.

5. Gate and Drain Voltages:

   • The maximum gate voltage (Vgs) should not exceed ±20V.
   • The maximum drain voltage (Vds) should not exceed 60V.

6. Timing Parameters:

   • The rise time (tr) and fall time (tf) are both approximately 100ns.
   • The propagation delay (tpd) is also around 100ns. These parameters are important for ensuring proper timing in your circuit.

7. Thermal Management:

   • The thermal resistance (θja) is 50°C/W. Use appropriate heatsinks or cooling solutions to manage heat, especially under high-power conditions.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

By following these guidelines, you can ensure optimal performance and longevity of the L6387ED.