Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Connect the Vcc pin to a stable power source.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device between -65°C and 150°C.

3. Current Ratings:

   • The input current should be between 1mA and 3mA.
   • The output current should not exceed 20mA, with a typical value of 10mA.

4. Timing Parameters:

   • Ensure that the rise time (tr) and fall time (tf) are within 10ns to 30ns.
   • The propagation delay (tpdl) should be between 5ns and 10ns.

5. Power Management:

   • The maximum power dissipation (Pd) should not exceed 150mW.
   • Keep the quiescent current (Iq) below 1μA for low-power applications.

6. Handling and Storage:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Store the device in a dry, cool environment to prevent degradation.

7. Mounting:

   • Follow the recommended PCB layout guidelines to ensure proper thermal management and electrical performance.
   • Use appropriate soldering techniques and temperatures to avoid damaging the device.

8. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets all specifications.

9. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.