Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 5.5V.
   • Connect the supply voltage to pin 14 and ground (GND) to pin 7.

2. Input Voltage:

   • The input voltage (V_I) should be between 0V and V_CC.
   • Avoid exceeding the supply voltage or grounding the inputs improperly.

3. Output Voltage:

   • When the output is high (V_OH), it should be at least 2.4V under a load of -1 mA.
   • When the output is low (V_OL), it should be no more than 0.4V under a load of 1 mA.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 30 nanoseconds at 5V and 25°C.
   • This value can vary with different operating conditions.

5. Power Dissipation:

   • The maximum power dissipation (P_D) should not exceed 100 mW.
   • Ensure adequate heat dissipation if operating near this limit.

6. Operating Temperature:

   • The device operates reliably between -40°C and 85°C.
   • Avoid exposing the device to temperatures outside this range during operation.

7. Storage Temperature:

   • The device can be stored between -65°C and 150°C.
   • Store the device in a dry environment to prevent moisture damage.

8. Handling:

   • Handle the device with care to avoid static discharge.
   • Use appropriate ESD protection when handling the device.

9. Mounting:

   • Ensure proper soldering techniques are used to avoid thermal stress.
   • Follow the recommended PCB layout guidelines for optimal performance.

10. Testing:

    • Test the device under typical operating conditions to ensure it meets the specified parameters.
    • Use a multimeter or oscilloscope to verify voltages and timing characteristics.