Share:
Specifications
SKU: 12405162
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | 4.5 | 5.0 | 5.5 | V | Operating voltage range |
| Output Current | Iout | - | 100 | 200 | mA | Maximum continuous output current |
| Power Dissipation | Pd | - | - | 600 | mW | Maximum power dissipation at 25°C ambient |
| Operating Temperature | Topr | -40 | - | 85 | °C | Operating temperature range |
| Storage Temperature | Tstg | -65 | - | 150 | °C | Storage temperature range |
| Input Voltage Range | Vin | 0 | - | 5.5 | V | Input voltage range |
| Quiescent Current | Iq | - | 10 | 20 | μA | Typical quiescent current at Vcc = 5V |
| Output Voltage (No Load) | Vout | 4.75 | 5.0 | 5.25 | V | Output voltage range with no load |
| Line Regulation | - | - | 0.01 | 0.05 | %/V | Change in output voltage for change in input voltage |
| Load Regulation | - | - | 0.01 | 0.05 | %/mA | Change in output voltage for change in load current |
| Dropout Voltage | Vdo | - | 0.5 | 1.5 | V | Voltage difference between Vin and Vout |
| Ripple Rejection | - | - | 60 | 80 | dB | Ability to reject input ripple at 120 Hz |
Instructions:
Power Supply Connection:
- Connect the supply voltage (Vcc) to the input pin.
- Ensure the supply voltage is within the specified range (4.5V to 5.5V).
Output Connection:
- Connect the output pin to the load or circuit requiring regulated power.
- The output voltage should be within the specified range (4.75V to 5.25V).
Ground Connection:
- Connect the ground pin to the common ground of the system.
Decoupling Capacitors:
- Place a 0.1μF ceramic capacitor close to the input pin to filter out high-frequency noise.
- Place a 10μF electrolytic capacitor close to the output pin to stabilize the output voltage.
Thermal Considerations:
- Ensure adequate heat dissipation if the device is operating near its maximum power dissipation (600mW).
- Use a heatsink if necessary, especially in high-temperature environments.
Operating Temperature:
- Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.
Storage:
- Store the device in a dry environment within the storage temperature range (-65°C to 150°C).
Load Regulation:
- The output voltage may vary slightly with changes in load current. Ensure the load regulation is within acceptable limits for your application.
Line Regulation:
- The output voltage may vary slightly with changes in input voltage. Ensure the line regulation is within acceptable limits for your application.
Ripple Rejection:
- The device provides good ripple rejection, but additional filtering may be required for very noisy input sources.
Inquiry - Z84C4010PEC
