Share:
Specifications
SKU: 12426765
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Device Type | High-Voltage, Low-Quiescent Current, Linear Regulator | - | - |
| Input Voltage | Minimum Input Voltage | 2.7 | V |
| Input Voltage | Maximum Input Voltage | 60 | V |
| Output Voltage | Fixed Output Voltage | 5.0 | V |
| Output Current | Maximum Output Current | 150 | mA |
| Quiescent Current | Quiescent Current (Typical) | 1.5 | μA |
| Dropout Voltage | Dropout Voltage (Typical at 150 mA) | 1.3 | V |
| Operating Temperature | Minimum Operating Temperature | -40 | °C |
| Operating Temperature | Maximum Operating Temperature | 125 | °C |
| Storage Temperature | Minimum Storage Temperature | -65 | °C |
| Storage Temperature | Maximum Storage Temperature | 150 | °C |
| Package | Package Type | SOT-23 | - |
| Pin Configuration | Pin 1: IN (Input), Pin 2: OUT (Output), Pin 3: GND (Ground) | - | - |
Instructions for Use:
- Input Connection: Connect the input voltage to Pin 1 (IN). Ensure the input voltage is within the specified range of 2.7V to 60V.
- Output Connection: Connect the load or circuit requiring regulated power to Pin 2 (OUT).
- Ground Connection: Connect the ground of your system to Pin 3 (GND).
- Capacitors:
- Input Capacitor: Place a 1μF ceramic capacitor close to the input pin to stabilize the input voltage.
- Output Capacitor: Place a 1μF ceramic capacitor close to the output pin to ensure stable regulation and reduce ripple.
- Thermal Considerations: The device can operate up to 125°C, but ensure adequate heat dissipation if operating near maximum temperature or current.
- Storage: Store the device in a dry environment between -65°C and 150°C.
- Handling: Handle with care to avoid damage to the pins and package. Use appropriate ESD protection when handling.
Notes:
- Always refer to the datasheet for more detailed information and specific application notes.
- Ensure all connections are secure and free from short circuits to prevent damage to the device.
Inquiry - PS21864-P
