Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 4.5V to 20V to avoid damage to the device.

2. Gate Drive Voltages:

   • The high-side and low-side gate drive voltages should also be within the range of 4.5V to 20V.
   • Proper decoupling capacitors should be placed close to the power pins to ensure stable operation.

3. Output Current:

   • The maximum source and sink currents are 2.5A. Do not exceed these limits to prevent overheating or damage.

4. Propagation Delays:

   • The propagation delays from high to low and low to high are typically 65ns. These values should be considered when designing the timing of your circuit.

5. Dead Time:

   • The typical dead time is 70ns. This helps prevent shoot-through current in half-bridge configurations.

6. Temperature Ranges:

   • The operating temperature range is from -40°C to 125°C.
   • The storage temperature range is from -55°C to 150°C. Ensure the device is stored within these limits to maintain reliability.

7. Layout Considerations:

   • Use short, wide traces for high-frequency signals to minimize parasitic inductance and capacitance.
   • Place bypass capacitors as close as possible to the V_CC and GND pins to reduce noise and improve stability.

8. Protection Circuits:

   • Implement appropriate overvoltage and overcurrent protection circuits to safeguard the device and connected components.

9. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage sensitive internal components.
   • Follow ESD (Electrostatic Discharge) guidelines during handling and assembly.