Share:
Specifications
SKU: 12443308
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | - | 5.5 | V | |
| Operating Temperature | Toper | -40 | - | 125 | °C | |
| Storage Temperature | Tstg | -65 | - | 150 | °C | |
| Output Current (High) | IOH | - | 8 | 15 | mA | @ VDD = 5V, TA = 25°C |
| Output Current (Low) | IOL | 16 | 24 | - | mA | @ VDD = 5V, TA = 25°C |
| Input Leakage Current | IIH | - | 1 | 5 | μA | @ VDD = 5V, VIN = VDD |
| Input Leakage Current | IIL | -5 | -1 | - | μA | @ VDD = 5V, VIN = 0V |
| Propagation Delay Time | tpd | 2 | 4 | 6 | ns | @ VDD = 5V, TA = 25°C |
| Power Dissipation | PD | - | - | 100 | mW | Per output pin |
| Maximum Junction Temp. | TJmax | - | - | 150 | °C |
Instructions for Use:
- Power Supply: Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
- Temperature Considerations: The device operates reliably between -40°C and 125°C. Store the device between -65°C and 150°C.
- Output Current: When driving loads, ensure the output current does not exceed 15mA for high outputs and -16mA for low outputs at VDD = 5V and TA = 25°C.
- Input Leakage: Be aware of input leakage currents, which can affect the stability of the input signals. Use appropriate pull-up or pull-down resistors if necessary.
- Propagation Delay: Account for the propagation delay time (tpd) of 2 to 6 nanoseconds when designing timing-sensitive circuits.
- Power Dissipation: Each output pin should not dissipate more than 100mW to avoid overheating.
- Junction Temperature: Monitor the junction temperature (TJ) to ensure it does not exceed 150°C to prevent damage to the device.
For detailed application notes and further information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - QS34X245Q3G
