Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 1.65 V to 3.6 V.
   • Use a stable power source to avoid voltage fluctuations that can affect performance.

2. Input Signals:

   • Input voltages should be within the valid logic levels:
     • V_IH (High) should be between 2.0 V and V_CC.
     • V_IL (Low) should be between 0 V and 0.8 V.
   • Avoid input voltages outside these ranges to prevent damage or undefined behavior.

3. Output Signals:

   • The output high (V_OH) should be at least 2.4 V when V_CC is 3.3 V and the output low (V_OL) should not exceed 0.4 V under the same conditions.
   • Ensure the load connected to the outputs does not exceed the maximum current ratings.

4. Propagation Delay:

   • The propagation delay times (t_PLH and t_PHL) are typically 2.5 ns at V_CC = 3.3 V and ambient temperature (T_A) = 25°C.
   • These values may vary with different operating conditions, so ensure your design accounts for potential variations.

5. Temperature Considerations:

   • The device operates reliably over a temperature range from -40°C to 85°C.
   • For storage, the temperature range is -65°C to 150°C.
   • Avoid exposing the device to temperatures outside these ranges to prevent damage.

6. Power Dissipation:

   • The maximum power dissipation is 350 mW at an ambient temperature of 70°C.
   • Ensure adequate heat dissipation if the device is expected to operate near its maximum power dissipation limit.

7. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store the device in a dry, cool environment to prevent moisture damage.

By following these guidelines, you can ensure reliable operation and longevity of the 74LVCH32245AEC device.