Share:
Specifications
SKU: 12510488
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4.5 | - | 5.5 | V | |
| Quiescent Current | IQ | - | 3.0 | - | μA | @ VDD = 5V, TA = 25°C |
| Input Offset Voltage | VOS | - | 1.0 | 3.0 | mV | @ VDD = 5V, TA = 25°C |
| Input Bias Current | IB | - | 100 | - | nA | @ VDD = 5V, TA = 25°C |
| Input Voltage Range | VIN | 0 | - | VDD | V | |
| Output Voltage Swing | VOUT | 0.1 | - | VDD-0.1 | V | @ VDD = 5V, RL = 10kΩ, TA = 25°C |
| Slew Rate | SR | - | 0.5 | - | V/μs | @ VDD = 5V, TA = 25°C |
| Bandwidth | BW | - | 1.0 | - | MHz | @ VDD = 5V, TA = 25°C |
| Common Mode Rejection Ratio | CMRR | 70 | - | 90 | dB | @ VDD = 5V, TA = 25°C |
| Power Supply Rejection Ratio | PSRR | 70 | - | 90 | dB | @ VDD = 5V, TA = 25°C |
| Operating Temperature | TA | -40 | - | 85 | °C | |
| Storage Temperature | TSTG | -65 | - | 150 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VDD) is within the specified range of 4.5V to 5.5V.
- Connect the power supply to the VDD pin and ground (GND) pin.
Input Signals:
- The input signals should be within the range of 0V to VDD.
- Avoid exceeding the input voltage range to prevent damage to the device.
Output Load:
- The output can swing from 0.1V to VDD - 0.1V.
- For optimal performance, ensure the load resistance (RL) is at least 10kΩ.
Operating Conditions:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device in an environment with temperatures between -65°C and 150°C.
Biasing and Compensation:
- Use appropriate biasing and compensation techniques to ensure stable operation and minimize noise.
Handling:
- Handle the device with care to avoid static discharge and physical damage.
- Follow standard ESD (Electrostatic Discharge) precautions when handling the device.
Testing:
- Test the device under typical conditions (VDD = 5V, TA = 25°C) to verify its performance parameters.
Soldering:
- Use a soldering iron with a temperature not exceeding 300°C to avoid damaging the device during assembly.
Inquiry - NIF5002NT1G
