Below is the parameter table and instructions for the SDH2136TR component:

Parameter Table

Instructions

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V. Operating outside this range can damage the device.

2. Operating Temperature (Ta):

   • The device is designed to operate between -40°C and 85°C. Avoid exposing the device to temperatures outside this range to prevent malfunction or damage.

3. Storage Temperature (Tstg):

   • Store the device between -65°C and 150°C. Extreme temperatures can affect the performance and reliability of the device.

4. Output Current:

   • The maximum output current for high level (Ioh) is -30mA and for low level (Iol) is 30mA. Do not exceed these limits to avoid damaging the output pins.

5. Input Voltage:

   • The input voltage for high level (VIH) should be between 3.5V and 5.5V, and for low level (VIL) should be between 0V and 1.5V. Ensure the input signals are within these ranges to avoid incorrect operation.

6. Propagation Delay Time:

   • The propagation delay time from low to high (tPLH) and high to low (tPHL) is typically 10ns with a load capacitance of 50pF. These values help in timing calculations for your circuit.

7. Power Consumption:

   • The typical power consumption is 10μA at 5V supply voltage with no load. This information is useful for power budgeting in your design.

8. Handling and Installation:

   • Handle the device with care to avoid static damage. Use appropriate ESD protection measures.
   • Ensure proper soldering and mounting to maintain good electrical connections and thermal management.

9. Testing:

   • Before integrating the device into your final application, test it under the specified operating conditions to ensure it meets the required performance specifications.

By following these parameters and instructions, you can ensure the reliable and efficient operation of the SDH2136TR component in your design.