Share:
Specifications
SKU: 12532618
| Parameter | Description | Value |
|---|---|---|
| Package Type | The type of package used for the device. | PLCC-20 |
| Operating Voltage (Vcc) | The recommended operating voltage range for the device. | 4.5 V to 5.5 V |
| Operating Temperature | The temperature range in which the device can operate reliably. | -40°C to +85°C |
| Programming Voltage (Vpp) | The programming voltage required for the device. | 12.0 V ± 0.5 V |
| Program Cycle Time | The time required to program the device. | 3 ms (typical) |
| Erasure Time | The time required to erase the device. | 1 second (typical) |
| Data Retention | The period during which data is retained in the device under specified conditions. | 10 years (minimum) |
| Input Current (Ii) | The maximum current drawn by each input pin. | 1 μA (maximum) |
| Output Current (Io) | The maximum current that can be sourced or sunk by each output pin. | 25 mA (maximum) |
| Propagation Delay Time | The time delay between the application of an input signal and the appearance of the corresponding output signal. | 10 ns (maximum) |
| Power Consumption | The maximum power consumption of the device at the specified operating conditions. | 100 mW (maximum) |
| Storage Temperature | The temperature range in which the device can be stored without damage. | -65°C to +150°C |
| Lead Finish | The finish on the leads of the device. | Matte Tin |
Instructions:
Power Supply:
- Ensure the device is powered within the specified operating voltage range (4.5 V to 5.5 V).
- Connect the Vcc pin to the positive supply and the GND pin to the ground.
Programming:
- Apply the programming voltage (Vpp) of 12.0 V ± 0.5 V to the appropriate pin.
- Use a compatible programmer to load the desired configuration into the device.
- The typical program cycle time is 3 ms.
Erasing:
- To erase the device, apply the programming voltage (Vpp) and use the erase command in the programmer.
- The typical erasure time is 1 second.
Operating Conditions:
- Operate the device within the specified temperature range (-40°C to +85°C) to ensure reliable performance.
- Store the device within the storage temperature range (-65°C to +150°C) to prevent damage.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal circuitry.
- Use proper ESD protection measures when handling the device.
Testing:
- After programming, verify the configuration using a compatible tester or by testing the device in a known good circuit.
Mounting:
- Solder the device to the PCB using standard reflow soldering techniques.
- Ensure the leads are properly aligned and securely soldered to the PCB pads.
Data Retention:
- The device retains data for a minimum of 10 years under specified operating conditions. Store the device in a dry, cool environment to maximize data retention.
Power Consumption:
- Monitor the power consumption to ensure it does not exceed 100 mW to avoid overheating and potential damage.
Propagation Delay:
- Account for the propagation delay time of 10 ns (maximum) in your circuit design to ensure proper timing and synchronization.
Inquiry - PALCE16V8Q-15PC/4
