Instructions for Use:

1. Handling:

   • Handle the H30PR5 with care to avoid physical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures.

2. Mounting:

   • Ensure the surface mount pads are clean and free from contaminants.
   • Apply a suitable amount of solder paste to the pads.
   • Place the resistor on the pads ensuring proper alignment.
   • Use a reflow soldering process with a temperature profile that matches the specifications of the resistor and the PCB material.

3. Soldering:

   • Preheat the PCB to the recommended temperature before soldering.
   • Use a soldering iron or reflow oven with a temperature setting within the specified range.
   • Avoid overheating the resistor, as it can affect its performance and reliability.

4. Testing:

   • After soldering, visually inspect the joints for proper wetting and absence of shorts or bridges.
   • Use a multimeter to verify the resistance value is within the specified tolerance.

5. Storage:

   • Store the H30PR5 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the components in their original packaging until ready for use to protect them from moisture and static.

6. Disposal:

   • Dispose of the H30PR5 in accordance with local regulations and environmental guidelines.
   • Recycle components where possible to reduce waste and environmental impact.