Instructions for Use:

1. Power Supply:

   • Ensure the input voltage is within the specified operating range (4.5 to 5.5V).
   • Do not exceed the maximum supply voltage (6.0V) to avoid damage to the device.

2. Output Configuration:

   • Connect the output pin to the load requiring a stable 3.3V supply.
   • The output current should not exceed 100mA.

3. Thermal Management:

   • The device has a thermal resistance of 125°C/W. Ensure adequate heat dissipation if operating at high currents or in high ambient temperatures.
   • Use a heatsink if necessary, especially if the device is expected to operate near its maximum output current.

4. Operating Environment:

   • The device can operate over a temperature range of -40°C to 85°C.
   • Store the device in an environment with a temperature range of -55°C to 150°C.

5. Stability and Filtering:

   • To ensure stability and reduce ripple, use appropriate input and output capacitors.
   • Recommended input capacitor: 10μF ceramic or tantalum.
   • Recommended output capacitor: 10μF ceramic or tantalum.

6. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store the device in a dry, cool place away from direct sunlight and sources of heat.

7. Mounting:

   • Follow standard surface mount technology (SMT) procedures for mounting the device on a PCB.
   • Ensure proper soldering to maintain electrical and mechanical integrity.

8. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the required specifications.
   • Use a multimeter to verify the output voltage and current.

9. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.