Share:
Specifications
SKU: 12538448
| Parameter | Description | Value |
|---|---|---|
| Part Number | Device Identifier | SIL9030CTU |
| Function | Description of the device | Silicon Controlled Rectifier (SCR) |
| Package Type | Type of package | TO-220 |
| Mounting Type | Method of mounting | Through-Hole |
| Maximum Voltage | Maximum voltage the device can handle (VDRM) | 600 V |
| Maximum Current | Maximum current the device can handle (ITSM) | 30 A |
| Holding Current | Minimum current required to keep the SCR in the conducting state (IH) | 50 mA |
| Gate Trigger Current | Minimum current required to trigger the SCR (IG(T)) | 10 mA |
| Power Dissipation | Maximum power dissipation at the junction (PTJ) | 75 W |
| Operating Temperature | Range of temperatures for operation (TJ) | -40°C to +125°C |
| Storage Temperature | Range of temperatures for storage (TSTG) | -65°C to +150°C |
Instructions:
Handling and Storage:
- Store the device in a dry, cool place away from direct sunlight.
- Handle with care to avoid mechanical damage.
Mounting:
- Ensure proper heat sinking to manage the power dissipation.
- Use a torque wrench to tighten the mounting screws to the recommended torque value to avoid over-tightening.
Electrical Connections:
- Connect the anode (A), cathode (K), and gate (G) terminals as per the circuit diagram.
- Ensure that the gate trigger current is sufficient to turn on the SCR reliably.
Thermal Management:
- The device should be mounted on a heatsink to ensure efficient heat dissipation.
- Monitor the junction temperature to ensure it does not exceed the maximum operating temperature.
Testing:
- Before installing the device in the final application, test it under controlled conditions to verify its performance.
- Use appropriate protective equipment when testing high-voltage circuits.
Safety Precautions:
- Always follow safety guidelines when working with high-voltage and high-current circuits.
- Disconnect the power supply before making any connections or adjustments.
Inquiry - SIL9030CTU
