Instructions for Use

1. Power Supply:

   • Connect the VCC pin to a stable power supply within the range of 3.3V to 5.0V.
   • Ensure the ground (GND) pins are connected to a common ground.

2. Signal Input:

   • Connect the video input signals to the designated input pins (e.g., IN1, IN2).
   • Ensure signal levels are within the specified range to avoid damage.

3. Signal Output:

   • Connect the video output signals to the designated output pins (e.g., OUT1, OUT2).
   • Use appropriate termination resistors to match the impedance of the transmission line.

4. Configuration:

   • Use the configuration pins (e.g., CFG1, CFG2) to set the operating mode and other parameters as needed.
   • Refer to the datasheet for specific configuration details.

5. Thermal Management:

   • Ensure adequate heat dissipation by providing a heatsink or thermal pad if necessary.
   • Monitor the temperature of the device during operation to ensure it stays within the operating temperature range.

6. ESD Precautions:

   • Handle the device with care to avoid ESD damage.
   • Use ESD protective equipment and follow proper handling procedures.

7. Testing:

   • Before deploying the device, perform thorough testing to ensure all functions are working correctly.
   • Use the test points provided on the PCB for diagnostic purposes.

8. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
   • Follow recommended storage practices to maintain the integrity of the device.

For more detailed information, refer to the full datasheet and application notes provided by the manufacturer.