Instructions for Use:

1. Power Supply:

   • Connect the input voltage (VIN) to a power supply within the range of 2.7V to 5.5V.
   • Ensure the power supply is stable and capable of providing the required current.

2. Output Connection:

   • Connect the load to the output terminals (OUT).
   • The maximum continuous output current is 3.5A.

3. Enable/Disable Control:

   • To enable the device, apply a voltage greater than 1.2V to the EN pin.
   • To disable the device, apply a voltage less than 0.8V to the EN pin.

4. Thermal Management:

   • Monitor the operating temperature to ensure it stays below 85°C.
   • If the device temperature exceeds 160°C, the thermal shutdown protection will activate, turning off the device to prevent damage.

5. Quiescent and Shutdown Current:

   • When enabled, the quiescent current is typically 100μA.
   • When disabled, the shutdown current is typically 0.1μA.

6. Storage Conditions:

   • Store the device in an environment with temperatures ranging from -65°C to 150°C.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure reliable connections and avoid thermal stress.

8. Application Notes:

   • For detailed application notes and circuit diagrams, refer to the datasheet provided by the manufacturer.
   • Consider using external components such as capacitors and resistors to optimize performance and stability.