Instructions for Use:

1. Mounting:

   • Ensure the component is mounted on a PCB with proper thermal management if high current or continuous operation is expected.
   • Use appropriate soldering techniques to avoid overheating the component.

2. Electrical Connections:

   • Connect the anode (A) to the positive supply and the cathode (K) to the negative supply or ground.
   • Use a current-limiting resistor in series with the LED to prevent damage from excessive current.

3. Forward Current:

   • Do not exceed the maximum continuous forward current (I_F) of 20mA at ambient temperature (Ta = 25°C).
   • For peak forward current (I_F(PK)), ensure the pulse duration does not exceed 10ms and the duty cycle is ≤ 1/10.

4. Reverse Voltage:

   • The reverse voltage (VR) should not exceed 5V to avoid damage to the diode.

5. Temperature:

   • Operate the device within the specified operating temperature range (-40°C to 85°C).
   • Store the device within the storage temperature range (-40°C to 100°C).

6. Thermal Management:

   • If the device is used in a high-temperature environment or with high current, consider using a heat sink or other cooling methods to manage the junction temperature.

7. Handling:

   • Handle the component with care to avoid mechanical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

8. Testing:

   • Before final assembly, test the component to ensure it meets the specified parameters.

9. Compliance:

   • Ensure that the use of the component complies with all relevant safety and regulatory standards.