Instructions for Use:

1. Power Supply:

   • The NJM4580L can operate with a supply voltage ranging from 2.4V to 16V.
   • Ensure that the power supply is stable and within the specified range to avoid damage to the device.

2. Input Signals:

   • The input voltage should be within the range of 0V to V_CC - 1.5V.
   • Avoid applying voltages outside this range to prevent damage or incorrect operation.

3. Output Configuration:

   • The output voltage swing is typically from 0.3V to V_CC - 0.3V when connected to a 2kΩ load.
   • For optimal performance, ensure that the load resistance is appropriate for the application.

4. Biasing:

   • The input bias current is very low (0.03μA typical), but it should be considered when designing circuits with high-impedance sources.

5. Stability:

   • The NJM4580L has a typical slew rate of 0.7V/μs, which is suitable for most audio applications.
   • For high-frequency applications, consider the bandwidth and gain-bandwidth product (GBP) of 1MHz.

6. Noise and Interference:

   • The common mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) are both 80dB typical, providing good immunity to noise and power supply variations.

7. Handling:

   • Handle the NJM4580L with care to avoid static discharge, which can damage the device.
   • Follow proper soldering techniques to ensure reliable connections and prevent thermal stress.

8. Applications:

   • The NJM4580L is suitable for a wide range of applications, including audio amplifiers, active filters, and signal conditioning circuits.