Share:
Specifications
SKU: 12596467
| Parameter | Description | Value |
|---|---|---|
| Part Number | Unique identifier for the component | PE-64950NL |
| Type | Category of the component | Phototransistor |
| Package | Physical package type | TO-18 |
| Emitter Wavelength | Wavelength of the emitted light | 950 nm (Infrared) |
| Collector-Emitter Voltage (VCEO) | Maximum voltage that can be applied between collector and emitter | 30 V |
| Collector Current (IC) | Maximum continuous current through the collector | 50 mA |
| Forward Current (IF) | Maximum forward current through the photodiode | 100 mA |
| Sensitivity | Responsivity to light | 0.5 A/W at 940 nm |
| Rise Time | Time to reach 90% of the final output level when the input changes from low to high | 10 μs |
| Fall Time | Time to fall from 90% to 10% of the initial output level when the input changes from high to low | 10 μs |
| Operating Temperature Range | Temperature range within which the device will operate reliably | -40°C to +85°C |
| Storage Temperature Range | Temperature range within which the device can be stored without damage | -40°C to +125°C |
Instructions:
Mounting:
- Ensure the component is mounted on a suitable PCB with proper soldering.
- Use a heat sink if necessary to dissipate heat, especially if operating near maximum current ratings.
Electrical Connections:
- Connect the emitter (E) to the ground.
- Connect the collector (C) to the load or input of the circuit.
- Apply the appropriate forward current (IF) to the photodiode to ensure optimal operation.
Handling:
- Handle the component with care to avoid physical damage.
- Use anti-static precautions to prevent damage from electrostatic discharge (ESD).
Testing:
- Test the component in a controlled environment to ensure it meets the specified parameters.
- Verify the rise and fall times using an oscilloscope for accurate measurement.
Storage:
- Store the component in a dry, cool place within the specified storage temperature range.
- Avoid exposure to extreme temperatures and humidity.
Safety:
- Do not exceed the maximum ratings specified in the parameter table to prevent damage to the component.
- Follow all relevant safety guidelines and regulations when handling and operating the component.
Inquiry - PE-64950NL
