Share:
Specifications
SKU: 12600313
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.7 | - | 5.5 | V | |
| Output Voltage | VOUT | - | 3.3 | - | V | Fixed |
| Output Current | IOUT | - | - | 1.2 | A | |
| Quiescent Current | IQ | - | 10 | - | μA | |
| Dropout Voltage | VDROP | - | 150 | - | mV | @ IOUT = 1.2A |
| Load Regulation | - | - | 0.5 | - | % | 10mA to 1.2A |
| Line Regulation | - | - | 0.05 | - | %/V | Over full input range |
| Ripple Rejection | - | - | 60 | - | dB | @ 1kHz |
| Operating Temperature | TOP | -40 | - | 85 | °C | |
| Storage Temperature | TSTG | -65 | - | 150 | °C |
Instructions for Use
Input Connection:
- Connect the input voltage (VIN) to the VIN pin.
- Ensure the input voltage is within the specified range (2.7V to 5.5V).
Output Connection:
- Connect the output load to the VOUT pin.
- The output voltage is fixed at 3.3V and can supply up to 1.2A.
Ground Connection:
- Connect the ground (GND) pin to the common ground of the system.
Capacitors:
- Place a 1μF ceramic capacitor close to the VIN pin for input filtering.
- Place a 1μF ceramic capacitor close to the VOUT pin for output filtering.
Thermal Management:
- Ensure adequate heat dissipation if operating at high current or in high ambient temperatures.
- The device can operate up to 85°C, but performance may degrade at higher temperatures.
Stability:
- The regulator is stable with ceramic capacitors.
- Avoid using capacitors with very low ESR as they may cause instability.
Storage:
- Store the device in a dry environment to prevent moisture damage.
- The storage temperature range is from -65°C to 150°C.
Handling:
- Handle the device with care to avoid static damage.
- Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.
Inquiry - TDUHC124B
