Share:
Specifications
SKU: 12603559
Below is the parameter table and instructions for the 74F04DC Hex Inverter.
74F04DC Parameter Table
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5.0 | 5.5 | V | |
| Input Low Voltage | VIL | 0.8 | - | - | V | VCC = 5V |
| Input High Voltage | VIH | - | - | 2.0 | V | VCC = 5V |
| Output Low Voltage | VOL | 0.25 | - | - | V | IOL = 16mA, VCC = 5V |
| Output High Voltage | VOH | - | - | 3.5 | V | IOH = -4mA, VCC = 5V |
| Propagation Delay Time | tpd | - | 5 | 7 | ns | VCC = 5V, TA = 25°C |
| Power Consumption | Ptot | - | 100 | - | mW | VCC = 5V, f = 10MHz |
| Operating Temperature Range | TA | -40 | - | 85 | °C |
Instructions for 74F04DC Hex Inverter
Supply Voltage:
- Ensure the supply voltage (VCC) is within the range of 4.5V to 5.5V.
- Connect VCC to the positive power supply and GND to the ground.
Input Signals:
- The input low voltage (VIL) should be less than or equal to 0.8V.
- The input high voltage (VIH) should be greater than or equal to 2.0V.
- Ensure that the input signals are within these ranges to avoid undefined behavior.
Output Signals:
- The output low voltage (VOL) will be less than or equal to 0.25V when the output is driving a load of 16mA.
- The output high voltage (VOH) will be greater than or equal to 3.5V when the output is sourcing a current of -4mA.
- Ensure that the load connected to the output does not exceed the maximum current ratings.
Propagation Delay:
- The propagation delay time (tpd) is typically around 5ns at 25°C and can vary between 5ns and 7ns.
- This parameter is crucial for timing considerations in digital circuits.
Power Consumption:
- The total power consumption (Ptot) is typically around 100mW at a supply voltage of 5V and a frequency of 10MHz.
- Ensure that the power supply can handle the total power consumption of the circuit.
Operating Temperature:
- The device is designed to operate within a temperature range of -40°C to 85°C.
- Avoid operating the device outside this range to prevent damage or unreliable performance.
Handling and Storage:
- Handle the device with care to avoid static discharge, which can damage the internal components.
- Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
Mounting and Soldering:
- Follow standard soldering practices to ensure reliable connections.
- Use a temperature-controlled soldering iron and avoid excessive heat, which can damage the device.
By following these parameters and instructions, you can ensure the proper operation and longevity of the 74F04DC Hex Inverter in your digital circuits.
(For reference only)Inquiry - 74F04DC
