Share:
Specifications
SKU: 12603647
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identification | MIP2F2 |
| Type | Device Type | MOSFET |
| Package | Enclosure Type | TO-220 |
| VDS (V) | Drain-to-Source Voltage | 60V |
| VGS (V) | Gate-to-Source Voltage | ±20V |
| ID (A) | Continuous Drain Current (25°C) | 10A |
| RDS(on) (Ω) | On-State Resistance at VGS = 10V | 0.02Ω |
| Power Dissipation (W) | Maximum Power Dissipation (25°C) | 150W |
| Operating Temperature (°C) | Junction Temperature Range | -55 to +175 |
| Storage Temperature (°C) | Storage Temperature Range | -65 to +150 |
| Total Gate Charge (nC) | Total Gate Charge at VGS = 10V | 45nC |
| Input Capacitance (pF) | Input Capacitance at VGS = 0V, f = 1MHz | 1300pF |
| Output Capacitance (pF) | Output Capacitance at VGS = 0V, f = 1MHz | 40pF |
| Reverse Transfer Capacitance (pF) | Reverse Transfer Capacitance at VDS = 30V, f = 1MHz | 35pF |
Instructions for Use:
Handling Precautions:
- Handle the device with care to avoid damage to the leads and body.
- Use proper ESD (Electrostatic Discharge) protection when handling the device.
Mounting:
- Ensure that the device is mounted on a suitable heat sink to dissipate heat effectively.
- Use thermal paste between the device and the heat sink to improve thermal conductivity.
Soldering:
- Preheat the PCB to reduce thermal shock.
- Use a soldering iron with a temperature range of 260°C to 300°C.
- Solder each lead for no more than 3 seconds to prevent damage to the device.
Biasing:
- Apply the gate voltage (VGS) within the specified range to ensure proper operation.
- Ensure that the drain voltage (VDS) does not exceed the maximum rated voltage.
Testing:
- Test the device under controlled conditions to verify its performance.
- Use appropriate test equipment to measure parameters such as RDS(on), VDS, and ID.
Storage:
- Store the device in a dry, cool place away from direct sunlight.
- Keep the device in its original packaging until ready for use to protect it from moisture and static electricity.
Safety:
- Always follow safety guidelines when working with high voltages and currents.
- Ensure that the device is properly insulated to prevent electrical shock.
Inquiry - MIP2F2
