Instructions for Use:

1. Handling:

   • Handle with care to avoid physical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Apply a suitable solder paste to the pads.
   • Place the resistor on the designated pads using a pick-and-place machine or tweezers.
   • Reflow solder at the recommended temperature profile, not exceeding 260°C.

3. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Use within the recommended shelf life to ensure optimal performance.

4. Testing:

   • After mounting, use a multimeter to verify the resistance value.
   • Check for any shorts or opens on the PCB.

5. Disposal:

   • Dispose of any defective components according to local regulations.
   • Follow RoHS guidelines for environmentally friendly disposal.