Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Use the quick connect terminals to securely attach the wires to the relay.
   • Mount the relay on a flat, stable surface using the provided mounting hardware.

2. Wiring:

   • Connect the power supply (12V DC) to the designated pins.
   • Connect the load to the normally open (NO) or normally closed (NC) contacts as required.
   • Ensure all connections are tight and secure to prevent loose connections which can cause arcing or failure.

3. Operation:

   • Apply the control signal to the coil terminals to energize the relay.
   • The relay will switch the contacts based on the control signal.
   • Verify the operation by checking the continuity of the contacts with a multimeter.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the relay contacts with a soft, dry cloth if necessary.
   • Replace the relay if it shows signs of malfunction or if the contacts are worn out.

5. Safety Precautions:

   • Always disconnect the power supply before installing or servicing the relay.
   • Do not exceed the rated voltage and current to avoid damage to the relay.
   • Ensure the relay is used within the specified operating temperature range to maintain reliability.