Instructions for Use:

1. Preparation:

   • Ensure that the device is powered off before installation.
   • Verify that the temperature control switch is suitable for your application by checking the rated voltage, current, and temperature.

2. Installation:

   • Mount the KSD9700 B60 switch in the desired location using the provided mounting method.
   • Connect the wires to the screw terminals, ensuring a secure connection.
   • Tighten the screws to prevent any loose connections.

3. Operation:

   • Power on the device.
   • The switch will close when the temperature drops below 60°C and open when the temperature rises above 60°C, with a hysteresis of ±5°C.

4. Maintenance:

   • Regularly inspect the switch for any signs of wear or damage.
   • Clean the switch with a dry cloth if necessary, but avoid using water or solvents.
   • Replace the switch if it shows signs of malfunction or if it has reached its life cycle limit.

5. Safety Precautions:

   • Do not exceed the rated voltage and current to prevent damage or fire.
   • Do not install the switch in environments with high humidity, corrosive gases, or flammable materials.
   • Ensure proper ventilation around the switch to prevent overheating.
   • Always follow local electrical codes and regulations.

6. Storage:

   • Store the switch in a dry, cool place away from direct sunlight and extreme temperatures.
   • Keep the switch in its original packaging until ready for use to protect it from dust and damage.