Share:
Specifications
SKU: 12605070
| Parameter | Description |
|---|---|
| Part Number | G2R-1-E-24VDC |
| Type | Relay Module |
| Input Voltage | 24V DC |
| Number of Channels | 1 Channel |
| Load Voltage | 250V AC / 30V DC (Max) |
| Load Current | 10A (Resistive Load) |
| Contact Form | SPDT (Single Pole Double Throw) |
| Switching Power | 300VA / 360W (Max) |
| Coil Resistance | 120Ω (Nominal) |
| Operating Temperature | -25°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (Non-condensing) |
| Insulation Resistance | >100MΩ at 500V DC |
| Dielectric Strength | 2500V AC for 1 minute |
| Contact Material | Silver Alloy |
| Mechanical Life | 10 million operations (Min) |
| Electrical Life | 100,000 operations (Min) |
| Dimensions | 35mm x 15mm x 11mm |
| Weight | 15g |
Instructions
Installation:
- Ensure the relay module is installed in a well-ventilated area to prevent overheating.
- Mount the relay on a DIN rail or a suitable mounting surface.
Connection:
- Connect the 24V DC power supply to the input terminals (L+ and L-).
- Connect the load to the common (COM) and normally open (NO) or normally closed (NC) terminals as required.
Operation:
- When the input voltage is applied, the relay coil energizes, causing the contacts to switch from NC to NO.
- When the input voltage is removed, the contacts return to their default position (NC).
Safety Precautions:
- Do not exceed the maximum load voltage and current ratings.
- Ensure all connections are secure and properly insulated.
- Avoid operating the relay in environments with high humidity or corrosive gases.
- Use appropriate fuses or circuit breakers to protect against overcurrent conditions.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Clean the relay contacts with a dry, lint-free cloth if necessary.
- Replace the relay if it fails to operate correctly or shows signs of damage.
Inquiry - G2R-1-E-24VDC
