Share:
Specifications
SKU: 12606171
| Parameter | Description | Value |
|---|---|---|
| Package Type | The type of package used for the device | PLCC-20 |
| Operating Voltage (Vcc) | The range of supply voltage that the device can operate under | 4.5V to 5.5V |
| Output Current per Pin | Maximum current that can be sourced or sunk by each output pin | 25mA |
| Propagation Delay Time | Time delay between input change and corresponding output change | 15ns (max) |
| Power Dissipation | Maximum power dissipation for the device | 350mW |
| Operating Temperature | Range of temperatures over which the device is guaranteed to operate | -40°C to 85°C |
| Storage Temperature | Range of temperatures over which the device can be stored without damage | -65°C to 150°C |
| Input Leakage Current | Maximum current that flows into an input pin when it is not driven | ±1μA |
| Output Leakage Current | Maximum current that flows out of an output pin when it is not driven | ±100μA |
| Standby Current | Current consumed by the device when all inputs are held at valid logic levels | 50μA (max) |
| Programming Voltage | Voltage required to program the device | 12.0V ± 0.5V |
| Programming Current | Maximum current required during programming | 10mA |
| Erase Time | Time required to erase the device | 10ms (max) |
| Program Cycle Time | Time required to complete a programming cycle | 10ms (max) |
Instructions for Use
Power Supply:
- Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
- Connect the ground (GND) pin to a stable reference ground.
Input Handling:
- Apply valid logic levels to all input pins. Avoid floating inputs as they can cause undefined behavior.
- Input leakage current should be within ±1μA to prevent unintended operation.
Output Handling:
- Do not exceed the maximum output current of 25mA per pin.
- Ensure the total power dissipation does not exceed 350mW to avoid overheating.
Programming:
- Use a compatible programmer to apply the programming voltage (12.0V ± 0.5V).
- The programming current should not exceed 10mA.
- Programming and erasing times are both 10ms (max).
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
- Store the device within the temperature range of -65°C to 150°C.
Standby Mode:
- When the device is not in use, ensure all inputs are held at valid logic levels to minimize standby current (50μA max).
Handling Precautions:
- Handle the device with care to avoid static discharge, which can damage the sensitive components.
- Follow proper soldering techniques to ensure reliable connections and avoid thermal stress.
Inquiry - GAL16V8B-15LP
