Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 4.5V to 5.5V.
   • Connect a decoupling capacitor (typically 0.1μF) close to the power pins to filter out noise.

2. Current Consumption:

   • The standby current (ICCS) should be monitored to ensure it does not exceed 0.5μA at 5V.
   • The active current (ICCA) should be within the range of 15mA to 30mA when operating at 5V and 5MHz.

3. Timing Parameters:

   • The access time (tAA) must be at least 70ns to ensure reliable data read/write operations.
   • The cycle time (tCYC) should be at least 100ns to prevent overlapping operations.

4. Signal Levels:

   • Ensure that the output high level (VOH) is at least 2.4V and does not exceed VCC - 0.5V.
   • The output low level (VOL) should be between 0V and 0.5V.
   • The input high level (VIH) should be at least 2.0V and not exceed VCC - 0.5V.
   • The input low level (VIL) should be between 0V and 0.8V.

5. Temperature Considerations:

   • Store the device in temperatures ranging from -65°C to 150°C.
   • Operate the device within the temperature range of -55°C to 85°C to ensure reliable performance.

6. Handling and Storage:

   • Handle the device with care to avoid static discharge.
   • Store in a dry, cool place to prevent moisture damage.

7. Testing and Validation:

   • Before deploying the device in a final application, perform thorough testing under all expected operating conditions to ensure reliability and performance.