Share:
Specifications
SKU: 12606206
| Parameter | Symbol | Min | Typical | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Operating Voltage | Vop | 3.0 | - | 5.5 | V | Supply voltage range |
| Operating Current | Iop | - | 2.5 | - | μA | Current consumption at Vop = 5V |
| Switching Voltage | Vsw | 1.0 | - | 4.0 | V | Voltage at which the switch changes state |
| Hysteresis Voltage | Vhys | 0.2 | - | 0.6 | V | Difference between switching on and off voltages |
| Output Low Voltage | Vol | - | 0.4 | - | V | Voltage at output when low |
| Output High Voltage | Voh | - | 4.5 | - | V | Voltage at output when high |
| Response Time | tpd | - | 1.0 | - | ms | Time to change state |
| Operating Temperature | Topr | -40 | - | 85 | °C | Ambient temperature range |
| Storage Temperature | Tstg | -55 | - | 125 | °C | Temperature range for storage |
Instructions for Using JS12N-K
Power Supply:
- Ensure the supply voltage (Vop) is within the range of 3.0V to 5.5V.
- Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the GND pin.
Input Signal:
- Apply the input signal to the IN pin.
- The switching voltage (Vsw) should be between 1.0V and 4.0V to trigger the switch.
- The hysteresis voltage (Vhys) ensures stable operation by providing a difference between the on and off thresholds.
Output Signal:
- The output signal will be available at the OUT pin.
- When the output is low, the voltage (Vol) will be approximately 0.4V.
- When the output is high, the voltage (Voh) will be approximately 4.5V.
Response Time:
- The device will change its state within 1.0ms after the input signal crosses the switching threshold.
Temperature Considerations:
- The operating temperature range (Topr) is from -40°C to 85°C.
- For storage, the temperature range (Tstg) is from -55°C to 125°C.
Handling and Installation:
- Handle the device with care to avoid damage from static electricity.
- Follow standard PCB assembly practices for soldering and mounting the component.
Testing:
- Before finalizing the design, test the device under various conditions to ensure it meets the required specifications.
Troubleshooting:
- If the device does not operate as expected, check the power supply, input signals, and connections.
- Ensure the ambient temperature is within the specified range.
Inquiry - JS12N-K
