Share:
Specifications
SKU: 12606373
| Parameter | Description | Value |
|---|---|---|
| Type | General Purpose Diode | - |
| Part Number | BYT53-G | - |
| Maximum Reverse Voltage (VR) | Maximum voltage that can be applied in reverse direction without breakdown | 1000 V |
| Maximum Forward Current (IF) | Maximum current that can flow through the diode in forward direction | 5 A |
| Peak Reverse Current (IRM) | Maximum peak reverse current that can be tolerated without damage | 25 mA |
| Forward Voltage (VF) | Voltage drop across the diode when conducting in forward direction at specified current | 1.1 V (at 5 A) |
| Reverse Recovery Time (trr) | Time it takes for the diode to switch from conducting to non-conducting state | 75 ns |
| Operating Temperature Range (Top) | Temperature range within which the diode can operate safely | -65°C to +175°C |
| Storage Temperature Range (Tstg) | Temperature range within which the diode can be stored without damage | -65°C to +175°C |
| Package Type | Case Type | TO-220 |
| Lead Finish | Surface finish of the leads | Tin (Sn) |
Instructions for Use:
Mounting:
- Ensure that the diode is mounted on a suitable heat sink if operating at high currents to prevent overheating.
- Use appropriate mounting hardware to secure the diode, ensuring good thermal contact with the heat sink.
Wiring:
- Connect the anode (A) to the positive side of the circuit and the cathode (K) to the negative side.
- Ensure that the leads are not bent too close to the body of the diode to avoid mechanical stress.
Handling:
- Handle the diode with care to avoid damaging the leads or the body.
- Use anti-static precautions to prevent electrostatic discharge (ESD) damage.
Testing:
- Before installing the diode in a circuit, test it using a multimeter to ensure it is functioning correctly.
- Check for continuity between the anode and cathode; there should be no continuity in reverse bias.
Storage:
- Store the diode in a dry, cool place away from direct sunlight and sources of heat.
- Keep the diode in its original packaging until ready for use to protect against static and physical damage.
Safety:
- Always follow safety guidelines when working with electrical components.
- Do not exceed the maximum ratings specified in the table to avoid damage to the diode.
Inquiry - BYT53-G
