Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • The typical supply current (IDD) is 100 μA in active mode.

2. Output Configuration:

   • Each output channel can source up to 20 mA of current.
   • Connect appropriate load resistors or devices to the output pins.

3. Temperature Considerations:

   • The operating temperature range (TOPR) is from -40°C to 85°C.
   • The storage temperature range (TSTG) is from -65°C to 150°C.

4. Capacitance:

   • The input capacitance (CIN) is typically 5 pF.
   • The output capacitance (COUT) is typically 10 pF.

5. Timing Parameters:

   • The rise time (tr) and fall time (tf) are both typically 10 ns.
   • The propagation delay (tPD) is typically 15 ns.

6. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

7. Mounting and Soldering:

   • Follow standard surface mount technology (SMT) procedures for mounting and soldering.
   • Use a temperature-controlled soldering iron to avoid thermal stress on the device.

8. Testing:

   • Before integrating the device into a circuit, test it individually to ensure proper functionality.
   • Use a multimeter to verify the supply voltage and output current.

9. Troubleshooting:

   • If the device does not function as expected, check the power supply, connections, and load.
   • Ensure that all components are within their specified operating parameters.