Share:
Specifications
SKU: 12606822
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Input Voltage | V_IN | 4.5 | - | 16 | V | Operating input voltage range |
| Output Voltage | V_OUT | 3.3 | - | - | V | Fixed output voltage |
| Output Current | I_OUT | - | 300 | 500 | mA | Continuous output current |
| Quiescent Current | I_Q | - | 5 | 10 | μA | Quiescent current at no load |
| Dropout Voltage | V_DO | - | 150 | 250 | mV | Dropout voltage at I_OUT = 500 mA |
| Load Regulation | - | - | 1 | 2 | % | Change in output voltage for load from 0 to 500 mA |
| Line Regulation | - | - | 0.1 | 0.5 | %/V | Change in output voltage for input voltage change from 4.5 V to 16 V |
| Ripple Rejection | - | 50 | 70 | 80 | dB | Power supply rejection ratio at 100 Hz |
| Thermal Shutdown | T_SHDN | - | 160 | - | °C | Temperature at which the device enters thermal shutdown |
| Operating Temperature | T_OP | -40 | - | 125 | °C | Operating temperature range |
| Storage Temperature | T_STG | -65 | - | 150 | °C | Storage temperature range |
Instructions:
- Input Voltage (V_IN): Ensure the input voltage is within the specified range of 4.5 V to 16 V to avoid damage to the device.
- Output Voltage (V_OUT): The MDME332AE provides a fixed output voltage of 3.3 V. No external components are required for this fixed output.
- Output Current (I_OUT): The device can provide a continuous output current up to 500 mA. For higher currents, ensure proper heat dissipation.
- Quiescent Current (I_Q): The quiescent current is typically 5 μA and can go up to 10 μA at no load. This is important for low-power applications.
- Dropout Voltage (V_DO): The dropout voltage is typically 150 mV and can go up to 250 mV at full load. This ensures efficient operation even at low input voltages.
- Load Regulation: The output voltage should remain within 1% to 2% of the nominal value when the load current changes from 0 to 500 mA.
- Line Regulation: The output voltage should change by no more than 0.1% to 0.5% per volt of input voltage change.
- Ripple Rejection: The device should reject input ripple with a power supply rejection ratio (PSRR) of 50 to 80 dB at 100 Hz.
- Thermal Shutdown (T_SHDN): The device will enter thermal shutdown if the temperature exceeds 160°C to protect against overheating.
- Operating Temperature (T_OP): The device is designed to operate within a temperature range of -40°C to 125°C.
- Storage Temperature (T_STG): Store the device in a temperature range of -65°C to 150°C to ensure long-term reliability.
Additional Notes:
- Capacitors: Use appropriate input and output capacitors to stabilize the circuit and reduce noise. Typical values are 1 μF for input and 10 μF for output.
- PCB Layout: Ensure good PCB layout practices to minimize noise and improve thermal performance. Keep the input and output traces short and wide.
- Heat Sinking: For high current applications, consider adding a heat sink or using a larger PCB copper area to dissipate heat effectively.
Inquiry - MDME332AE
