Below is the parameter table and instructions for the TA78L05F (TE12L.F) voltage regulator.

Parameter Table

Instructions

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical damage.
   • Use proper soldering techniques to avoid thermal shock. The maximum soldering temperature should not exceed 260°C for more than 10 seconds.

2. Input Voltage:

   • The input voltage should be within the specified range (7.0V to 24.0V) to ensure proper operation and prevent damage to the device.
   • A capacitor (typically 10μF to 100μF) should be placed close to the input pin to filter out noise and stabilize the input voltage.

3. Output Voltage:

   • The output voltage is regulated to 5.0V ± 5%.
   • A capacitor (typically 10μF to 100μF) should be placed close to the output pin to filter out ripple and improve stability.

4. Output Current:

   • The device can provide a continuous output current of up to 150mA.
   • For higher current requirements, consider using a heatsink or a more powerful regulator.

5. Thermal Considerations:

   • The device includes thermal shutdown protection, which activates at temperatures between 160°C and 180°C.
   • Ensure adequate heat dissipation, especially when operating at high output currents or in high ambient temperatures.

6. Polarity:

   • Ensure correct polarity when connecting the device. Reversing the input and output connections can damage the regulator.

7. Testing:

   • Before final assembly, test the regulator with a known load to verify its performance and stability.
   • Monitor the temperature of the device during testing to ensure it does not exceed the maximum operating temperature.

8. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Avoid exposing the device to extreme temperatures or humidity.

By following these instructions, you can ensure reliable and efficient operation of the TA78L05F (TE12L.F) voltage regulator.