Instructions for Use:

1. Power Supply:

   • Connect the VCC pin to a power supply within the range of 2.7V to 3.6V.
   • Ensure a stable power supply to avoid data corruption.

2. Programming:

   • The device does not require a separate programming voltage (VPP).
   • Use the standard command set for flash memory programming and erasing.
   • Program and erase operations should be performed according to the specified cycle time of 5 ms to ensure data integrity.

3. Access Time:

   • The read access time is 70 ns. Ensure that your system timing is compatible with this value to avoid read errors.

4. Temperature:

   • Operate the device within the industrial temperature range of -40°C to +85°C to ensure reliable performance.

5. Endurance:

   • The device can withstand up to 100,000 program/erase cycles. Monitor usage to avoid exceeding this limit.

6. Data Retention:

   • Data retention is guaranteed for up to 10 years under normal operating conditions.

7. Mounting:

   • The device is available in a TSOP-48 package. Follow standard surface mount technology (SMT) procedures for mounting and soldering.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the memory cells.
   • Store the device in a dry environment to prevent moisture damage.

9. Pin Configuration:

   • Refer to the datasheet for detailed pin configuration and signal descriptions.

10. Testing:

    • Perform initial testing to verify proper operation before integrating the device into your system.
    • Use appropriate test vectors to validate read, write, and erase functions.

For more detailed information, refer to the full datasheet provided by the manufacturer.