Instructions:

1. Installation:

   • Ensure the input voltage matches the specified range.
   • Connect the input wires to the AC power source.
   • Connect the output wires to the LED load.
   • Secure the driver in a well-ventilated area to prevent overheating.

2. Operation:

   • Turn on the power supply to start the LED driver.
   • Monitor the temperature and ensure it stays within the operating range.
   • Do not exceed the maximum output current to avoid damage.

3. Maintenance:

   • Regularly inspect connections for signs of wear or damage.
   • Clean the driver with a dry cloth to remove dust and debris.
   • If any issues arise, refer to the troubleshooting section or contact the manufacturer.

4. Troubleshooting:

   • No Output: Check input voltage and connections.
   • Overheating: Ensure proper ventilation and check for blockages.
   • Flashing LEDs: Verify output current is within limits and check for short circuits.

5. Safety Precautions:

   • Disconnect power before performing any maintenance.
   • Do not operate the driver in environments with high humidity or corrosive gases.
   • Follow all local electrical codes and regulations.