Share:
Specifications
SKU: 12607351
| Parameter | Description | Value |
|---|---|---|
| Part Number | Part identification | RY900114 |
| Type | Type of component | Resistor |
| Resistance | Resistance value | 10 kΩ |
| Tolerance | Tolerance of resistance | ±1% |
| Power Rating | Maximum power dissipation | 0.25 W |
| Operating Temp | Operating temperature range | -55°C to +125°C |
| Case Size | Physical size of the component | 0805 (2012 metric) |
| Termination | Type of termination | SMD (Surface Mount) |
| Compliance | Regulatory compliance | RoHS, REACH |
| Lead Time | Typical lead time for delivery | 4-6 weeks |
Instructions for Use:
Handling:
- Handle with care to avoid mechanical damage.
- Use appropriate ESD (Electrostatic Discharge) protection measures.
Mounting:
- Place the resistor on the PCB (Printed Circuit Board) according to the design layout.
- Ensure proper alignment and orientation if applicable.
- Use a reflow soldering process suitable for SMD components.
Soldering:
- Preheat the PCB to reduce thermal shock.
- Apply solder paste to the pads.
- Place the resistor on the pads and pass through the reflow oven.
- Follow the recommended reflow profile for the solder paste used.
Inspection:
- Visually inspect the solder joints for quality.
- Ensure there are no shorts or open circuits.
- Check for proper adhesion and alignment.
Testing:
- Measure the resistance value using a multimeter to ensure it meets the specified tolerance.
- Perform functional testing as part of the overall assembly.
Storage:
- Store in a dry, cool place away from direct sunlight.
- Keep in original packaging until ready for use to prevent moisture absorption.
Disposal:
- Dispose of any defective or unused components in accordance with local environmental regulations.
Inquiry - RY900114
