Share:
Specifications
SKU: 12607492
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | - | 4.5 | 5.0 | 5.5 | V |
| Output Current (per channel) | IO | Continuous | - | 100 | - | mA |
| Peak Output Current (per channel) | IOPK | Pulse | - | 300 | - | mA |
| Maximum Power Dissipation | PD | TA = 25°C | - | 1500 | - | mW |
| Operating Temperature Range | TA | - | -40 | - | 85 | °C |
| Storage Temperature Range | TSTG | - | -65 | - | 150 | °C |
| Input Voltage (High Level) | VIH | - | 2.0 | 3.5 | 5.5 | V |
| Input Voltage (Low Level) | VIL | - | 0.0 | 0.8 | - | V |
| Input Leakage Current | IIL | VIN = 0V | - | -1.0 | 1.0 | μA |
| Output Leakage Current (High Level) | IOLH | VOUT = VCC | - | -1.0 | 1.0 | μA |
| Output Leakage Current (Low Level) | IOLL | VOUT = 0V | - | -1.0 | 1.0 | μA |
| Propagation Delay Time (High to Low) | tPLH | VCC = 5V, IL = 10mA | - | 250 | - | ns |
| Propagation Delay Time (Low to High) | tPHL | VCC = 5V, IH = 10mA | - | 250 | - | ns |
Instructions for Use:
- Supply Voltage: Ensure the supply voltage is within the specified range (4.5V to 5.5V). Exceeding this range can damage the device.
- Output Current: The device can provide a continuous current of up to 100mA per channel and a peak current of up to 300mA for short pulses.
- Power Dissipation: Do not exceed the maximum power dissipation of 1500mW at 25°C ambient temperature.
- Temperature Ranges:
- Operating Temperature: The device operates reliably between -40°C and 85°C.
- Storage Temperature: Store the device between -65°C and 150°C.
- Input Voltages:
- High Level: Ensure the input voltage is between 2.0V and 5.5V for a high logic level.
- Low Level: Ensure the input voltage is below 0.8V for a low logic level.
- Leakage Currents: Keep the input and output leakage currents within the specified limits to avoid unwanted behavior.
- Propagation Delay: The propagation delay times (both high to low and low to high) are typically 250ns at 5V supply voltage.
Additional Notes:
- Always use appropriate decoupling capacitors near the power supply pins to ensure stable operation.
- Ensure proper heat sinking if operating at or near the maximum power dissipation.
- Refer to the datasheet for detailed information on pin configurations and specific application notes.
Inquiry - UDN2954W
