Instructions for Use:

1. Power Supply:

   • Connect the power supply to the VCC pin.
   • Ensure the voltage is within the operating range (4.5 to 24 VDC).
   • Ground the GND pin.

2. Output Connection:

   • Connect the output pin (OUT) to your microcontroller or other digital input.
   • The output is an open collector, so you may need to use a pull-up resistor to a suitable voltage level (e.g., 5V or 3.3V).

3. Magnetic Field Detection:

   • Place the sensor in the area where the magnetic field is to be detected.
   • The sensor will switch its output based on the presence or absence of a magnetic field exceeding the sensitivity threshold (50 G).

4. Mounting:

   • Mount the sensor in a stable position to avoid mechanical stress.
   • Ensure the sensor is not exposed to temperatures outside the operating range (-40 to 85°C).

5. Handling:

   • Handle the sensor with care to avoid damage.
   • Avoid exposing the sensor to high humidity or corrosive environments.

6. Testing:

   • Test the sensor by applying a known magnetic field and verifying the output state.
   • Use a multimeter to check the output voltage when the magnetic field is present and absent.

7. Storage:

   • Store the sensor in a dry, cool place within the storage temperature range (-40 to 125°C).