Instructions:

1. Input Connection:

   • Connect the positive terminal of the input voltage to the VIN+ pin.
   • Connect the negative terminal of the input voltage to the VIN- pin.

2. Output Connection:

   • Connect the load to the VOUT+ pin for positive output.
   • Connect the load to the VOUT- pin for negative output.

3. Mounting:

   • Ensure the device is securely mounted on a PCB using the recommended soldering profile.
   • Avoid excessive mechanical stress on the pins during assembly.

4. Operation:

   • Ensure the input voltage is within the specified range (7V - 14V).
   • Do not exceed the maximum output current of 0.7A.
   • Monitor the operating temperature to ensure it stays within the specified range (-40°C to +85°C).

5. Protection:

   • The converter includes overvoltage, overcurrent, short circuit, and overtemperature protection.
   • In case of any fault, the converter will automatically shut down to prevent damage.

6. Storage:

   • Store the device in a dry, cool place within the storage temperature range (-55°C to +125°C).

7. Compliance:

   • The device complies with CE and RoHS standards.

For detailed technical specifications and further information, refer to the datasheet provided by the manufacturer.