Share:
Specifications
SKU: 12608176
| Parameter | Description | Value |
|---|---|---|
| Part Number | Unique identifier for the component | KSC2682-Y |
| Type | Component category | Surface Mount |
| Package | Physical dimensions and pin configuration | SOP-8 |
| Operating Voltage | Range of voltages at which the component operates | 4.5V to 5.5V |
| Operating Current | Maximum current consumption | 10mA |
| Operating Temperature | Temperature range for optimal performance | -40°C to +85°C |
| Storage Temperature | Temperature range for storage | -55°C to +125°C |
| Frequency Range | Range of frequencies supported | 100kHz to 1MHz |
| Input Impedance | Resistance to input signals | 10kΩ |
| Output Impedance | Resistance to output signals | 50Ω |
| Rise Time | Time taken for the output to rise from 10% to 90% | 10ns |
| Fall Time | Time taken for the output to fall from 90% to 10% | 10ns |
| Power Consumption | Maximum power consumption | 50mW |
| ESD Rating | Electrostatic discharge tolerance | ±2kV (HBM) |
| Mounting | Method of attachment to the PCB | Reflow Soldering |
Instructions for Use:
Handling:
- Handle the KSC2682-Y with care to avoid damage from electrostatic discharge (ESD). Use proper ESD protection equipment.
- Avoid touching the leads or the body of the component directly.
Mounting:
- Place the component on the PCB according to the specified footprint.
- Use reflow soldering for mounting. Ensure the temperature profile is within the recommended range for the solder paste used.
Power Supply:
- Connect the component to a stable power supply within the operating voltage range (4.5V to 5.5V).
- Ensure the power supply can provide the maximum operating current of 10mA.
Operating Environment:
- Operate the component within the specified temperature range (-40°C to +85°C) for optimal performance.
- Store the component in a dry environment within the storage temperature range (-55°C to +125°C).
Signal Integrity:
- Use appropriate decoupling capacitors (e.g., 0.1μF ceramic) near the power pins to maintain signal integrity.
- Ensure that the input and output impedances match the specified values to avoid signal reflection and degradation.
Testing:
- Test the component using a signal generator and oscilloscope to verify the rise and fall times, as well as the frequency response.
- Check the power consumption to ensure it does not exceed the maximum rating.
Troubleshooting:
- If the component does not function as expected, check the power supply, connections, and environmental conditions.
- Verify that the component is not damaged by ESD or improper handling.
Disposal:
- Dispose of the component in accordance with local regulations for electronic waste.
Inquiry - KSC2682-Y
