Below is the parameter table and instructions for the SN75173:

SN75173 Parameter Table

SN75173 Instructions

1. Power Supply:

   • Ensure that the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input Signals:

   • The input signals should be within the valid logic levels:
     • High: V_IH > 2.0V
     • Low: V_IL < 1.5V
   • Avoid floating inputs; use pull-up or pull-down resistors as necessary.

3. Output Signals:

   • The output signals will be:
     • High: V_OH > 2.4V when I_OL = -4mA
     • Low: V_OL < 0.6V when I_OL = 16mA
   • Ensure that the load connected to the outputs does not exceed the maximum current ratings.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for a change in the input signal to appear at the output. It is typically between 10ns and 20ns at 25°C.
   • Skew (t_skew) is the difference in propagation delay between different channels and is typically between 0ns and 4ns.

5. Temperature Considerations:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STG) is from -65°C to 150°C.

6. Handling and Storage:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Store the device in a dry, cool place within the specified storage temperature range.

7. Application Notes:

   • The SN75173 is suitable for high-speed data transmission and can be used in various digital communication systems.
   • Refer to the datasheet for detailed information on pin configurations, timing diagrams, and application circuits.

For more detailed information, refer to the official datasheet provided by the manufacturer.