Instructions for Use:

1. Power Supply:

   • Connect the Vcc pin to a power supply within the range of 4.5V to 5.5V.
   • Connect the GND pin to the ground of the power supply.

2. Output Connection:

   • The output is an open collector, so connect a pull-up resistor between the output pin and Vcc.
   • The output will be low (0V) when the sensor detects a magnetic field of at least 30G.
   • The output will be high (Vcc) when no magnetic field is detected.

3. Mounting:

   • Ensure the sensor is mounted in a location where it can detect the magnetic field without interference from other magnetic sources.
   • The sensor is sensitive to both north and south poles due to its bipolar nature.

4. Temperature Considerations:

   • Operate the sensor within the temperature range of -40°C to +85°C to ensure reliable performance.

5. Handling:

   • Handle the sensor with care to avoid damage to the pins or the package.
   • Avoid exposing the sensor to excessive mechanical stress or moisture.

6. Testing:

   • To test the sensor, bring a magnet close to the sensor and observe the output change.
   • The output should switch from high to low when the magnetic field strength exceeds 30G.

7. Storage:

   • Store the sensor in a dry, cool place away from strong magnetic fields and static electricity.