Share:


48M033F

Specifications

SKU: 12609106

BUY 48M033F https://www.utsource.net/itm/p/12609106.html

Parameter Description Value Unit
Part Number Component Identifier 48M033F -
Capacitance Electrical capacity to store charge 33 μF
Voltage Rating Maximum DC voltage the capacitor can withstand 48 VDC
Tolerance Variation from the nominal value ±10% -
Operating Temperature Range Temperature range for reliable operation -55 to +85 °C
Ripple Current Maximum RMS current at specified frequency and temperature 220 mA (100 kHz, 20°C)
ESR (Equivalent Series Resistance) Resistance in series with the ideal capacitor 0.035 Ω (100 kHz, 20°C)
ESL (Equivalent Series Inductance) Inductance in series with the ideal capacitor 1.5 nH
Dielectric Material Insulating material used in the capacitor Ceramic -
Package Type Physical form factor of the component Radial Lead -
Dimensions Size of the component 5.0 x 5.0 x 1.6 mm (L x W x H)
Mounting Type Method of attaching the component to a circuit board Through-Hole -
Compliance Regulatory standards met by the component RoHS, REACH -

Instructions:

  1. Handling and Storage:

    • Store the capacitors in a dry, cool place to avoid moisture damage.
    • Handle the capacitors with care to prevent mechanical damage.
  2. Mounting:

    • Ensure the leads are not bent excessively close to the body to avoid mechanical stress.
    • Solder the leads quickly to prevent heat damage to the capacitor.
    • Use a soldering iron with a temperature setting no higher than 350°C.
    • Allow the solder to cool naturally without applying additional stress.
  3. Electrical Connection:

    • Connect the capacitor with the correct polarity if it is a polarized type.
    • Ensure the applied voltage does not exceed the rated voltage to prevent breakdown and failure.
    • Keep the ripple current within the specified limits to avoid overheating and reduced lifespan.
  4. Testing:

    • Use a multimeter or capacitance meter to verify the capacitance and ESR values.
    • Test the capacitor under operating conditions to ensure it meets the required performance specifications.
  5. Disposal:

    • Dispose of the capacitors according to local environmental regulations.
    • Recycle the components where possible to reduce waste.
(For reference only)

 Inquiry - 48M033F