Instructions:

1. Handling:

   • Handle with care to avoid damaging the leads or the body.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Mounting:

   • Ensure the correct orientation before soldering.
   • Preheat the board to reduce thermal shock.
   • Solder at a temperature of 350°C for no more than 3 seconds per joint.
   • Inspect all solder joints for proper wetting and absence of cold solder joints.

3. Storage:

   • Store in a dry, cool place.
   • Avoid exposure to high humidity and extreme temperatures.

4. Testing:

   • Test the component after mounting to ensure it is functioning correctly.
   • Use a multimeter to check for continuity and resistance as specified in the datasheet.

5. Disposal:

   • Dispose of the component according to local regulations for electronic waste.
   • Recycle whenever possible.